Use AC Manifold<\/h3>\n<\/li>\n<\/ul>\n

The AC manifold is a special AC measurement tool that can measure the lower pressure of the AC. By using this tool, you can find out whether the compressor oil is still suitable for use or not, so you can replace it immediately.<\/p>\n

\n
• \n

  Visit the Workshop<\/h3>\n<\/li>\n<\/ul>\n

  If you don't have time to check it yourself, it is recommended that you take your car to an official repair shop to have it checked. You can take your favorite Wuling car to 150 dealers spread throughout Indonesia to get the best service for your car.<\/p>\n

  Signs that Your car's AC Compressor Oil is Running Out<\/h2>\n

  If your car's AC compressor still has a lot of oil or is almost out of oil, you can easily find out by studying the following characteristics:<\/p>\n

  \n
  1. Because running out of AC compressor oil can cause the AC compressor to be unstable, the car AC becomes less powerful when cooled.<\/li>\n
  2. Friction between AC components becomes greater, which reduces the performance of the AC compressor. Usually indicates that the AC compressor oil is running out.<\/li>\n
  3. Due to too much friction between the components in the AC, the AC compressor breaks down, which causes a noisy and harsh sound.<\/li>\n
  4. When the AC is turned on, the car becomes less powerful. This is because when the AC is on, the AC requires more power to maintain performance between components. Thus, if the compressor oil decreases, the AC will of course need more power to maintain performance between components.<\/li>\n<\/ol>\n

     <\/p>\n

     How to Change AC Compressor Oil in a Car<\/h2>\n

     There are several steps you can take when changing the AC compressor oil. Here's how to change AC compressor oil:<\/p>\n

     \n
     • \n

       Turn off the AC System<\/h3>\n<\/li>\n<\/ul>\n

       Before you start filling your car's AC compressor oil, make sure your AC system is not active. Turn off the AC and let the vehicle run for a few minutes. This will relieve system pressure, allowing you to work safely without accidents.<\/p>\n

       \n
       • \n

         Find the Location of the AC Compressor<\/h3>\n<\/li>\n<\/ul>\n

         The next step is to find the location of the AC compressor in your car. Usually located near the engine, drive belt, or AC condenser. Carefully scan the area around the machine.<\/p>\n

         \n
         • \n

           Find the Oil Fill Point<\/h3>\n<\/li>\n<\/ul>\n

           After finding the AC compressor, check the parts and look for the oil filling point. Piston type compressors usually have a cover that indicates the oil filling location. Carefully remove the cap to access the oil fill point.<\/p>\n

           \n
           • \n

             Clean the Area Around the Charging Point<\/h3>\n<\/li>\n<\/ul>\n

             Before you begin filling oil into the system, clean the area around the fill point with a clean cloth to remove any dust, dirt, or other residue that could contaminate the oil. This will minimize the risk of contamination when oil enters the system.<\/p>\n

             \n
             • \n

               Start Filling Oil<\/h3>\n<\/li>\n<\/ul>\n

               It's time to fill oil into the AC compressor. Connect a suitable oil filling device to the filling point you specified previously. Make sure the charging device and charging point are connected securely and tightly.<\/p>\n

               During the filling process, slowly add the recommended AC compressor oil into the system. To ensure that you do not fill in more oil than recommended, pay attention to the oil level indicator on the filling tool. Filling with more oil can disrupt the performance of the AC compressor.<\/p>\n

               \n
               • \n

                 Replace the Cover Cap<\/h3>\n<\/li>\n<\/ul>\n

                 After filling the oil, make sure the cover cap is installed tightly. This will prevent oil from leaking and reduce contamination.<\/p>\n

                 \n
                 • \n

                   Check AC Performance<\/h3>\n<\/li>\n<\/ul>\n

                   Check the performance of your AC system after filling the AC compressor oil. Check whether there are any strange symptoms or sounds and whether the AC produces cool air properly.<\/p>\n

                   After reading the explanation above, now you definitely know the importance of AC compressor oil to keep your car in top condition. Make sure to maintain your car regularly and pay attention to the symptoms above so that it is easy to deal with the car's condition in the future.<\/p>\n","desktopBanner":null,"mobileBanner":null,"introTitle":null,"introContent":null,"iframeYoutubeId":null,"formCountdown":null,"startCountdown":null,"finishCountdown":null,"termsAndConditions":null,"cta_link":null,"cta_text":null,"cta_external":null,"wp_foot":null}